joosteto-hue/README.md

978 B

Simple python script to set colours of HUE lamps (via the bridge).

Author: joost witteveen (joosteto@gmail.com)

Examples

Get a valid access code from the bridge:

  1. press the button on the bridge
  2. Run the following command: python3 hue.py --getuser yourusername
  3. The access code will be saved in the file accesscode, and used for next commands.

Make all lamps as bright as possible, and green. Hue ranges from 0 (red) to 360 (red again), Bri(ghtness) from 0 to 1:

python3 hue.py --hue 120 --bri 1

To make lamp 1 red and lamps 2 and 3 blue:

python3 hue.py --lamps 1 --hue 0
python3 hue.py --lamps 1,2 --hue 4

Show json response for a '/lights/2' http GET request:

python3 hue.py --get /lights/2

Continuously check for long 'off' button press on switch id=4, and loop hue of all lamps when pressed:

python3 hue.py --checklong0 4

More info about the HUE lamps:

https://domoticproject.com/controlling-philips-hue-lights-with-raspberry-pi/